Kryo 1060 - 180

Dimensions

Internal

External

Height

64 cm

112 cm

Width

1 x 50 cm

86 cm

Depth

50 cm

116 cm

Weight

100 kg (shipping weight inc. packaging) approx.

Capacity

3500 x 2ml ampoules

 

Kryo 1060 - 380

Dimensions

Internal

External

Height

64 cm

 112 cm

Width

2 x 50 cm

132 cm

Depth

50 cm

116 cm

Weight

160 kg (shipping weight inc. packaging) approx.

Capacity

8000 x 2ml ampoules

 

Circulation

Horizontal laminar flow

Temperature range

+40șC to -100șC. Warning! The freezer is fitted with a manually-resettable thermal cut-out to prevent over heating. This will operate if the chamber is programmed to run above +40șC and will require a Service Engineer to reset it.

Cooling medium

Liquid nitrogen 22 - 30 psi

Heater

1700W

Sensors: Control and sample

4-wire Platinum resistance thermometer. Sensors are linearised in software to international standards that utilise a 4096-point lookup table based on BS1904:1984 Table 1. Calibration facility provided.

Accuracy

±0.5șC at a hold at 0șC (dynamic accuracy depends on actual program, e.g. rate of change of temperature

Heating rates

0.01șC/min to 1șC/min

Cooling rates

-0.01șC/min to -5șC/min

Power requirements

230 V ~ 50/60Hz, 16A (max.) The freezer may be damaged by voltage surges in excess of 15% above nominal

Chart recorder

Sensitivity: 16.7mV/șC.
Nominal impedance > 10K

Standards

Designed to comply with BSEN 61010,  EN50082-2, EN50081-2

Storage temperature

-10șC to +70șC

Storage humidity

Up to 95% non-condensing

Operating temperature

5șC to 40șC

Operating humidity

90%

Main

Overview

Specification

Picture

Planer Controlled Rate Freezer Kryo 360 1.7 560 16 750 30 Integra Cryogenic Low Temperature Freezing Cryopreservation storage vessel laboratory Controlled Rate Freezers Controlled rate freezer controlled rate freezer controlled rate freezer

Kryo 1060 Specification
extra030202
Image5